CREASING RULES

Hardness	39 HRC
Heights	20.0 - 23.8 mm
Thickness	0.53 (1.5pt), 0.71 (2pt), 1.05 1.05 (3pt), 1.42 (4pt)
Profiles	SR, DR, NT, WRT, WFT, WPC

Super Crease creasing rule is an ideal rule for general
use. Its extra smooth radius prevents cracking on the
fold of the die-cut materials.
The through hardened decarburized steel minimizes tool
wear with optimum durability.


Application

• Paperboard
• Corrugated board, Labels
• Folding cartons
• Medium to long run work
• Available in clockwise and anti-clockwise coils

 

Product	Super 52
Hardness	Body - 40 - 44  HRC Edge - 44 HRC
Heights	Cutting Height 23.8 mm Creasing Height 23.3 mm
Thickness	0.7 (2pt) - 1.05 mm (3pt)
Bevel execution	CB
Bevel angels	52°
Bevel finish	shaved and ground

A very wide variety of dimensions can be made to order.

The standard creasing profile is Flat Top Crease, but
Round Top Crease can also be produced. The special
feature of this type is the rounded form of the crease
segment to ensure a smooth fold.

The base product specifications and tolerances are the
same as for Super 52.

Height	Thickness	Tooth and Gap	on stock
23.8 mm	0.71 mm (2pt), 1.05 mm (3pt)	3 mm x 3 mm
23.8 mm	0.71 mm (2pt), 1.05 mm (3pt)	4 mm x 4 mm
23.8 mm	0.71 mm (2pt), 1.05 mm (3pt)	6 mm x 6 mm
23.8 mm	0.71 mm (2pt), 1.05 mm (3pt)	7 mm x 7 mm
23.8 mm	0.71 mm (2pt), 1.05 mm (3pt)	8 mm x 4 mm
23.8 mm	0.71 mm (2pt), 1.05 mm (3pt)	8 mm x 8 mm
23.8 mm	0.71 mm (2pt), 1.05 mm (3pt)	9 mm x 9 mm
23.8 mm	0.71 mm (2pt), 1.05 mm (3pt)	10 mm x 5 mm
23.8 mm	0.71 mm (2pt), 1.05 mm (3pt)	10 mm x 10 mm	X
23.8 mm	0.71 mm (2pt), 1.05 mm (3pt)	15 mm x 10 mm
23.8 mm	0.71 mm (2pt), 1.05 mm (3pt)	15 mm x 15 mm
23.8 mm	0.71 mm (2pt), 1.05 mm (3pt)	20 mm x 20 mm